Digital reading gas detector (4 gas) w/ pump

Alat deteksi dan ukur konsentrasi gas H2S, CO,
O2 dan LEL/Combustible.
Simultaneously for hydrogen sulfide (H2S), carbon monoxide (CO), oxygen (O2) and combustibles.
The compact and field tough Gas Detector features a non-intrusive integrated sampling pump designed for performance, reliability and ease-of-use.
Features

  • Continuous monitoring of CO, O2, H2S, and %LEL concentrations
  • Visual, vibrating, and 95 dB audible alarms for high, low, STEL, TWA, over limit, low battery, and pump
  • Secure and accurate history with datalogging; Uses compatible infrared-to-USB adapter to take readings from unit to PC
  • Fully functional self-test at every startup for sensor integrity, battery status, circuit integrity, and audible/visual alarms
  • Compatible with MicroDock II calibration and bump test station
  • Rechargeable battery; Typical battery life 13 hours @ 32°F, 8 hours @ -4°F, full recharge in 6 hours
  • CSA approved for Class I, Div 1, Groups A-D, plus IECex and ATEX

Specification
Gases : H2S, CO, O2, LEL
Size : 5.1 x 2.8 x 2.0 in. / 13.1 x 7.0 x 5.2 cm
Weight : 11.5 oz. / 328 g
Temperature : -4 to 122ºF / -20 to 50ºC
Humidity : 10 – 100% RH (non-condensing)
Alarms :

  • Visual, vibrating, audible (95dB)
  • Low, High, STEL, TWA, OL (over limit), Low Battery, Pump
  • Gas Detector
  • Sensors inside
  • Stainless-steel alligator clip
  • Battery
  • 1 m calibration hose with quick connect
  • 3 m sampling hose with particulate filter and quick connect
  • Instructions

H2S: 0 – 200 ppm (1 ppm increments)
CO : 0 – 1000 ppm (1 ppm increments)
O2 : 0 – 30.0% vol. (0.1% vol. increments)
LEL : (combustible): 0 – 100% LEL (1% LEL increments) or 0 – 5.0% v/v methane

Accesories:
Sample probe (1 ft. / 0.3 m) with hydrophobic and particulate filters

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Digital reading gas detector (4 gas) w/ pump”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *