Flaw Detector

Alat inspeksi hasil pengelasan
Range: 1mm to 10m at steel velocity, range selectable in fixed steps or continuously variable
Material Velocity: Continuously adjustable from 1000 to 9999 m/s, 7 selectable material velocities
Display Delay: -5 to 3400 us in steel (dependent on range)
Probe Delay/Zero Offset: 0 to 99.999 us
Damping: 50, 75, 150, 500 ohms
Gain: 0.0 to 110.0 dB adjustable in selectable steps 0.2, 0.5, 1.0, 2.0, 6.0, 12.0, user definable, and locked
Test Modes: Pulse echo, dual, and thru-transmission Pulser
Square wave excitation pulse
Pulse Voltage: (Square wave pulser mode)
50 to 500 V scrollable in 10 V adjustments
Pulse Width: (Square wave pulser mode)
Tunable from 50 to 1000 ns in 10 ns adjustments
Pulse Energy (Spike mode): Low, Medium, High
Pulse Repetition Frequency: Automatically adjust from 25 to 1500 Hz
Bandwidth: 0.4 to 25 MHz with 3 selectable settings including broadband
Gate Monitors: Two independent flaw gates controllable over entire sweep range
Measurement Modes: Zero-to-first, multi-echo with selectable flank or peak detection

Rectification: Positive half-wave, negative half-wave, full-wave, RF
Reject (suppression): 0 to 90% linear
Units: Inch, millimeter
Operating Temperature: 0 C to 55 C operating, -25 C to 70 C storable
Languages: English
Probe Connectors: BNC or LEMO
Keypad: International symbols
Battery Life: 6 hours
Size: 302mmX251mmX51mm
Weight: 2.4kg with battery


Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Flaw Detector”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *